-
alumminum die casting process typically has five steps, which are listed.
Jul 02 , 2020
1. the two halves of the die mold are first cleaned to remove any residue from the last injection. Then, each half is lubricated to facilitate ejection from the mold later on in the process. after lubrication, the two halves of the die are properly clamped together. sufficient force is needed to keep the two dies securely clamped together. The time needed to close and the clamp will increase with ...
อ่านเพิ่มเติม
-
กระบวนการตัดและเชื่อมโปรไฟล์อลูมิเนียม
Nov 29 , 2023
1. วิธีการตัดโปรไฟล์อลูมิเนียม โดยทั่วไปการตัดโปรไฟล์อะลูมิเนียมต้องใช้เครื่องตัดอะลูมิเนียมแบบมืออาชีพ มิฉะนั้นจะทำให้เกิดปัญหา เช่น หน้าตัดที่หยาบและขนาดที่ไม่ถูกต้อง ขั้นแรกให้ทาน้ำมันหล่อลื่นบนเครื่องตัดหรือโปรไฟล์อะลูมิเนียม จากนั้นจึงตัดด้วยเครื่องจักรโดยตรง หากต้องการตัดมุมพิเศษก็สามารถใช้เครื่อง CNC ตัดได้ 2. วิธีการเชื่อมโปรไฟล์อลูมิเนียมอัลลอยด์ การเชื่อมแก๊ส: ถือคบเพลิงเชื่อมไว้ในมือขวา...
อ่านเพิ่มเติม